Positive disconnect, S/w reset – Cabletron Systems STARPLUS 2700 Series User Manual
Page 21
Programming
17
Positive Disconnect
Default setting is Enabled.
1.
Enter Programming Mode.
2.
To change setting to Disable, press 0.
3.
To change setting to Enable, press 1.
S/W Reset
To clear all data:
1.
Hang-up.
2.
Press and hold the keypad buttons 1, 4, and 7 simultaneously.
3.
While still holding the buttons, lift the handset.
4.
On releasing the pressed buttons, all of the data will be cleared,
and previously stored settings will return to the factory-
installed defaults.