beautypg.com

Pro-Link DUST MOP TREATMENT FA004 EN User Manual

Page 3

background image

Product name: Air Filter FSA

Product #: CPC 514, 06223917F, 0021, 1000001339, 0021_19014, 0021_13514 Version #: 01 Issue date: 03-28-2014

SDS US

3 / 7

8. Exposure controls/personal protection

Occupational exposure limits

US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components

Type

Value

Propane (CAS 74-98-6)

PEL

1800 mg/m3

1000 ppm

US. NIOSH: Pocket Guide to Chemical Hazards
Components

Type

Value

Propane (CAS 74-98-6)

TWA

1800 mg/m3

1000 ppm

Biological limit values

No biological exposure limits noted for the ingredient(s).

Appropriate engineering
controls

Explosion-proof general and local exhaust ventilation.

Individual protection measures, such as personal protective equipment

Eye/face protection

Wear safety glasses with side shields (or goggles).

Hand protection

Wear protective gloves.

Other

Wear suitable protective clothing.

Respiratory protection If engineering controls do not maintain airborne concentrations below recommended exposure

limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn.

Thermal hazards

Wear appropriate thermal protective clothing, when necessary.

General hygiene
considerations

When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.

9. Physical and chemical properties

Appearance

Color

Not available.

Form

Aerosol.

Physical state

Gas.

Flash point

-156.00 °F (-104.44 °C) Propellant estimated

Melting point/freezing point

Not available.

Odor

Not available.

pH

Not available.

Solubility(ies)

Not available.

Vapor density

Not available.

Vapor pressure

11.18 psig @70F estimated

Viscosity

Not available.

Other information

Specific gravity

0.748 estimated

10. Stability and reactivity

Reactivity

Strong oxidizing agents.

Chemical stability

Material is stable under normal conditions.

Possibility of hazardous
reactions

No dangerous reaction known under conditions of normal use.

Conditions to avoid

Avoid heat, sparks, open flames and other ignition sources. Contact with incompatible materials.

Hazardous decomposition
products

No hazardous decomposition products are known.

11. Toxicological information

Information on likely routes of exposure

Ingestion

Smallest quantities reaching the lungs through swallowing or subsequent vomiting may result in
lung edema or pneumonia.

Inhalation

No adverse effects due to inhalation are expected.

Skin contact

No adverse effects due to skin contact are expected.