Closing the chassis – Cisco 1701 User Manual

Page 9

C-9

Cisco 1701 ADSL Security Access Router Hardware Installation Guide

OL-3954-02

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules

Closing the Chassis

After installing memory or a VPN module on the motherboard, close the chassis
by following these steps:

Step 1

If you disconnected the fan from the motherboard as described in the

section, reconnect the fan cable to the connector labeled FAN on the

motherboard.

Step 2

Locate the posts that protrude from the inside of the chassis cover, and locate the
corresponding openings on the chassis bottom.

Step 3

Line up the posts with the corresponding openings, as shown in

carefully slide the posts into the openings, taking care not to damage the router
motherboard with the posts.