Zigen HX-88 - Manual (Page 28)

Matrix Switching System—User Manual
28
7.0.3.4 Other Application
The software utility will show you at least 32 unit host ID and Name. You can click the
Console down list to select which Host that you want to configure output /input values as
Fiugure 7-14. The entire connected Host name will be shown on the Console List as
figure 7-15. For this model, the software utility only shows an ID:00 for the Name: HX-88
presently.
 When the Console List is empty, please pay attention to the location of switch 1 on
the rear panel of Host is correct. Then, click Scan to research the configured Host. For
HX-88 model, only have to make the Console down list value to “00”.
Figure 7-14 Figure 7-15