Zigen HX-88 - Manual (Page 23)

Matrix Switching System—User Manual
23
7.0.2.6 Options Function
Activation Function:
In the main configuration menu, select Options to pop up the Options Window as
shown in Figure 7-6（a）
Figure 7-6（a） Figure 7-6（b）
Function Description:
Linking Methods: In “Port number” select either COM1 port or COM2 port as shown in
Figure 7-6 （b）; in “Baud rate” select 9600 for signal transmission as shown in Figure 7-6
（a）
7.0.2.7 Other Application
Displays the presently saved switching status as shown in Figure 6-7 below:
Figure 7-7
When input corresponding to Output is enabling, it shows the Output ports
corresponding to the Input ports; when they are disable it will show red “None” in the
relative field.
7.0.2.8 Communication Protocol/Control Command Code
Communication Protocol: Baud rate 9600bps, no odd or even calibration bit address,
8bit transmission address, 1bit stop address. Please refer to the “Command list.pdf” in
the CD-ROM for more relative Command Code information.