3 lan web configuration – Zigen HX-88 User Manual
Page 24
Matrix Switching System—User Manual
24
7.0.3 LAN Web Configuration
Open the Browser, key in the default IP addreto login the AV
MATRIX Control configuration screen. Once the default IP address is changed, please
use the changed IP to login.
The software controls signal connection between the corresponding input port and
output port as required. The LAN main configuration screen is as below:
Figure 7-8 LAN Web Configuration Screen
HDMI is integrated Video/Audio switching equipment; please only key in the Output
Channel No. into the Video field, the Audio field value will be a default depends on the
Video value automatically.
Scan: To search the host controlled by the LAN Web Configuration. When the Console
List content is empty, you can click the Scan to research and update the Console List.
Options: Allows you to configure the IP address.
Set: Click this button to set the connected combinations both output and input ports.
Refresh: To refresh the values of the configuration screen. Any changed settings directly
on the HX-88 equipment will not respond to the AV Matrix operating interface, you have
to click the Refresh button to refresh the configuration screen so that it shows the
changed values.
OFF: Disable the entire output channels.
STO: The
“Store Key” saves all current input/output corresponding relations.
RCL: The
“Retriever Key” retrieves the saved input/output corresponding relations.
For more relatived information, please refer to 5.0.1. Front Panel.
All Output: A Hot Key for you to set the same value to all
output channel. Select the All
Output check box, then key in example
“5” value in the channel 1 output. Click anywere
on the screen, the all channel outputs will become
“5” value.