Zigen HX-44 - Manual (Page 8)

Matrix Switching System—User Manual
7
 OUT 1~4 keys (output channel): Indicate the Channel 1~Channel 4 for HDMI signal
output to peripheral display. You can also use these keys to adjust the status or access
the settings
 IN 1~4 keys (input channel): Indicate the Channel 1~Channel 4 for HDMI signal input.
You can use these keys to switch to the connection of the connected signal source
channels.
 IR1: Infrared receiver.
 All: This key allows you to set single input channel to all output channels.
- Press “All” key.
- Select one of the IN 1~4 keys.
- The selected IN x key will deliver the signal to all output channels.
- You can also press “All” key and then the “OFF” key to disable all the displayed
images.
 OFF: Disable the entire output channels. Press one of the OUT x keys that you want to
disable, then press the OFF key.
 STO: The “Store Key” saves all current input/output corresponding relations.
- Press the “STO” key.
- Arrange the Output and Input channel combinations.
- The relation between the Output and Input settings will be saved in the memory
temporarily.
 RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
- Press the “RCL” key.
- Then press the previously saved output channel key
- The system will retrieve the saved input/output status and implement current
status switching.
 EDID: FIX (fix mode) and TV1 (access the first output channel) selection key.
- FIX mode: The HX-44 will supply a set of fixed EDID values to support up to
1080P high performance TV.
- TV1 mode: The HX-44 will access the EDID values of high performance TV that
is connected to the first output channel, and copy the EDID value to all the input
channels so that the DVD player can support all the HDTV ’s.
 LCD: LCD display shows current HDMI matrix status and operation status.