Zigen HX-44 - Manual (Page 19)

Matrix Switching System—User Manual
18
The final results will be as shown in Figure 6-3 below:
Figure 6-3
6.0.2.3 Select all output, Deselect all output Switching Functions
（1）Select all output Function Description: You can use this function to select all
output ports to output one input port.
A specific example of operation is described below:
Example: Your HX-44 matrix with all input and output ports properly connected to the
equipment. The needed input/output ports should be set to channel 1 input and sent to
all output-ports.
Make sure you have selected the
“Video” check box (
). Then, press the
“Select all output” key and select the input number key 01. Click on the matrix icons
along the 01 row to transform them into to complete the command operation.
（2）Deselect all output Function Description: It is used to disable the Select all
output function.