Casio CELVIANO AP-200 - Manual (Page 22)

E-20
Configuring Settings with the Keyboard
■ Tones
■ Song/Metronome
Parameter List
Parameter Settings
Operation
Type
(page E-18)
Description Remarks
1 Tone selection See page E-6.
Default: GRAND
PIANO
(MODERN) A Assigns a tone to the
keyboard.
(page E-6)
2 Brilliance
(BRILLIANCE) –3 to 0 to 3
Default: 0 B Specifies the brilliance of
notes.
(page E-8)
3 Reverb
(REVERB) Off (OFF), 1 to 4
Default: 2 A Specifies the reverb of
notes.
(page E-9)
4 Chorus Off (OFF), 1 to 4
Default: Off A Controls the breadth of
notes.
(page E-9) • Chorus is not available in the Duet Mode.
• When tones are layered, Chorus is applied
only to the second tone you select for
layering.
• Turning on Chorus while a bass tone is
selected will apply the effect to the bass
tone only. Chorus will not be applied to
the high-range tone.
Parameter Settings
Operation
Type
(page E-18)
Description Remarks
5 Song Select
(SONG
SELECT) 01 to 60
Default: 01 B (+/–)
C (0 to 9) Selects a Music Library
tune.
(page E-12) • Always enter two-digits when using the
number keys (0 to 9) to input a value.
Example: To input 8, enter 0, 8 (leading
zero required).
• This setting cannot be changed while
recording.
6 Tempo
(TEMPO) 020 to 255
Default: 120 B (+/–)
C (0 to 9) Specifies the tempo of
Music Library songs, the
metronome, recording and
playback, etc.
(page E-10) • Always enter three digits when using the
number keys (0 to 9) to input a value.
Example: To input 90, enter 0, 9, 0 (leading
zero required).
• During recording, pressing + and – at the
same time sets a value of 120.
7 Metronome
Beat
(METRONOME
BEAT) 0, 2, 3, 4, 6
Default: 4 A Specifies the metronome
beat.
(page E-10)
• The metronome beat setting cannot be
changed while playback of a Music
Library tune is in progress.
8 Song volume 00 to 42
Default: 42 B Sets the volume level of
Music Library playback. • This setting cannot be changed while
recording.
9 Metronome
Volume 00 to 42
Default: 36 B Specifies the metronome
volume.
(page E-10)