Ryobi P521 - Manual (Page 7)

7 - English
FEATURES
PRODUCT SPECIFICATIONS
Motor ..................................................................18 Volt DC
Length of Stroke ........................................................ 3/4 in.
Strokes Per Minute ............................ 0-2,100 s/min. (SPM)
Switch ......................................................... Variable Speed Cutting Angle ................................0° to 45° (Left and Right)
Orbital Motion ......................................................4 Settings
Laser Guide .................................Class IIIa, <5mW, 650nm
KNOW YOUR JIG SAW
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE STORAGE
When not in use, you can place the blades provided with
your orbital jig saw in the storage compartment located on
the back of the saw.
HEX KEY STORAGE
When not using the hex key included with your jig saw, you
may place it in the convenient storage area on the base.
LASER GUIDE SWITCH
The laser guide will generate a red laser beam on the work
surface in front of the saw when the switch is turned on.
LOCK-OFF BUTTON
Your saw is equipped with a lock-off button which reduces
the possibility of accidental starting.
ORBITAL ADJUSTMENT KNOB
Choose from four orbital adjustment positions for fine to
aggressive cutting.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require the
use of a blade wrench when installing or removing the blade.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Orbital Jig Saw
Hex Key
T- Shank Saw Blades (2)
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
ASSEMBLY
UNPACKING
This product requires assembly.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.