Avaya 3600 Series - Manual (Page 11)

Avaya, Inc. Avaya Configuration Cradle
Administrator Guide
• Gray: file up to date. The settings have been saved.
The
Copy settings arrows and boxes allow you to copy settings to the handset side of
the window where they may then be written to the handset in the Cradle. Or the
configuration in a handset may be copied to the
Editable settings area and edited or
saved. The Sys Grp Usr checkboxes allow you to copy just the settings you require.
When clicked, the
Re ad Phone and Write Phone buttons initiate the transfer of
configuration data from or to the handset in the Cradle. The Stop button will halt the
transfer.
The
Serial, MAC, and Ver windows display the serial number, MAC address, and
firmware version of the handset in the Cradle. This information is not stored (I’m
not sure whether the firmware version is stored in the Config file).
The four labeled flags on the right indicate the status of the configuration transfer:
•
Active : green when attempting communication with handset in Cradle. Turns
yellow if a timeout occurs (may be due to an improperly seated handset). The
software will repeatedly re-attempt communication after a timeout so re-seating
the handset should correct the problem.
• Read : green when information is currently being read from the handset in the
Cradle.
•
Write : yellow when information is currently being written to the handset in the
Cradle.
•
Error : red when an error has occurred. An error message will appear on the status
bar at the bottom of the main window.
21-300630, Issue 1, July 2005 Page 11