Ryobi RY60520 - Manual (Page 7)

7
FEATURES
Fig. 1
PRODUcT SPEciFicATiONS
Engine Size ...................................................................................................................................................................5.4cc
Engine Output ..............................................................................................................................................................1. HP
Sand Tank Capacity ..................................................................................................................................................... 13 lbs.
KNOW YOUR cULTivATOR
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
ENGiNE SWiTcH
The engine switch controls the ignition system. The switch must
be in the i ( ON ) position for the engine to start and run. To stop,
place the switch in the O ( OFF ) position.
JUST ADD SAND ™
Putting sand in the sand tank allows greater stability when oper-
ating the cultivator, and also gives added weight to the machine,
allowing it to cultivate with less effort and vibration.
PRiMER BULB
The primer bulb pumps fuel from the fuel tank to the
carburetor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.
REcOiL STARTER
The recoil starter is used for starting the engine .
START LEvER
The start lever opens and closes the choke valve in the carbu-
retor. The
FULL position enriches the fuel mixture for starting
a cold engine. The RUN position provides the correct fuel
mixture for normal operation after starting, or for restarting a
warm engine.
THROTTLE LEvER
The throttle lever controls the rotation speed of the tines.
ENGINE
SWITCH
THROTTLE
LEVER
FUEL TANK
INNER TINES
JUST ADD SAND ™
PRIMER
BULB
START
LEVER
RECOIL
STARTER
OUTER
TINE
OUTER
TINE
DRAG BAR
WHEEL
ASSEMBLY
ACCESSORY
HITCH
PIN
TINE
SHIELD