Maintenance – Ryobi EMM0001 User Manual
Page 13
12
13
MAINTENANCE
WARNING:
To avoid serious personal injury, always remove the
batteries from the tool when cleaning or performing any
maintenance.
GENERAL MAINTENANCE
n
Before initial use, wipe AIRgrip vacuum base with a damp
cloth to remove any residue.
n
Store the unit indoors.
n
When not in use, the vacuum base and attachments
should be kept in the protective case.
n
Keep the unit free of dust and liquids. Use a damp cloth
and mild soap to clean the outside casing. Avoid using
solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial
solvents and may be damaged by their use.
�n To clean the laser lens and lighting lens, if needed, use
ONLY a soft cloth or cotton swab moistened with glass
cleaner.
n
Check the batteries regularly to avoid deterioration. Re-
move the batteries from the vacuum base, laser attach-
ment, and/or lighting attachment, if you will not be using
them for an extended time.
�n Do not disassemble the laser level attachment. This could
cause exposure to hazardous laser radiation.
n
Do not attempt to change any part of the laser lens.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic, which may result in serious personal
injury.
ALWAYS BE AWARE of the location
where the laser light is emitted when
using the laser level attachment. AL-
WAYS MAKE SURE that any bystanders
in the vicinity of use are made aware of
the dangers of looking directly into the
laser beam.