Petsafe Wireless Pet Containment System PIF-300-21 - Manual (Page 7)

7 www.petsafe.net
EN
FR
ES
NL
IT
DE
OPERATING GUIDE
STEP 1
Set Up the Transmitter
Important: You may need to move the Transmitter several times before determining the
fi nal location.
The Transmitter is located at the exact centre of the desired Pet Area. Place the Transmitter:
• On the ground fl oor of your home and at least 60 cm (2 ft) above the fl oor.
• In a dry, well ventilated, protected area.
• In an area where temperatures do not fall below freezing (e.g., garage, basement,
shed, cupboard).
• On a non-metal table or mount on a wall (1A). A mounting template is included on the back of
this guide.
• At least 1 m (3 ft) from large metal objects, as these items may reduce the size and shape of your
Pet Area (1B).
To maximize your Pet Area, make
sure the Boundary Switch is on
“High” and the Boundary Control
Dial is set to “8” (1C). Plug Power
Adapter into Power Jack and
standard outlet. Turn the
Transmitter on.
Receiver Collar
Contact Points
Receiver
Indicator
Light
Washers
Battery
Transmitter
Boundary Switch
On/Off Switch
Power Jack
Power Light
Boundary Control Dial
H A P P Y O W N E R S
S A F E P E T S
BOUNDAR
Y
CONTROL
7
8
Power
Boundary Switch
Low
High
8
1m
(3ft)
Wall
Mount
Tabletop
1A 1B 1C