Petsafe Ultralight™ Add-A-Dog® Extra Receiver Collar - Manual (Page 3)

www.petsafe.net 3
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact Points. Long
Contact Points for pets with long or thick hair are available
through our Customer Care Center at 1-800-732-2677. Tighten
the Contact Points using Test Light Tool (A) one-half turn
beyond fi nger tight. Check the tightness weekly.
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver Collar is
on your pet.
This Receiver Collar utilizes a replaceable PetSafe ® battery
(RFA-67). This unique battery is designed to make battery
replacement easier and increase water protection.
To insert the battery, align the symbols on the battery
(arrow) and Receiver Collar (triangle) (B). Use the edge of
the Test Light Tool to turn the battery clockwise until the
arrow lines up with the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise
using the edge of the Test Light Tool (C). DO NOT attempt
to cut into or pry open the battery. Be sure to discard the
used battery properly.
A
B
C