Petsafe Stubborn Dog Add-A-Dog® Extra Receiver Collar - Manual (Page 7)

www.petsafe.net 7
To Set the Correction Level
Read all steps before attempting to set the Correction Level.
Remove the clear plastic cover with the edge of the Test Light 1.
Tool to expose the Correction Level Button (1D).
With the battery installed, press the Correction Level Button
2.
and release when the Receiver Indicator Light lights up (1E).
The Receiver Indicator Light will emit a series of fl ashes
3.
representing the Correction Level.
Increase the Correction Level by pressing and releasing the
4.
Correction Level Button within 5 seconds of the previous series
of fl ashes.
After setting the Correction Level, replace the cover to protect
5.
the Correction Level Button.
The Correction Levels increase in strength from 1 to 5. Pushing
the Correction Level Button while the Receiver Collar is on level
5 will cause the Receiver Collar to revert to level 1. Refer to the
Function and Response Table to choose the Correction Level that
best fi ts your pet.
1E
1D