Petsafe Pawz Away® Extra Mini Pet Barrier - Manual (Page 17)

www.petsafe.net 17
4. To program the Receiver Collar to either mode A or mode B,
press and hold the (-) button and then press the (+) button for
approximately 5 seconds. Programming is complete when you hear
a series of three beeps from the Receiver Collar. If the YardMax
™
Rechargeable Receiver Collar does not respond, wake it up from
sleep mode by rotating or shaking the Receiver Collar and program
within 20 seconds.
5. Once the Receiver Collar has been programmed, press the (+) button
to turn the Barrier Transmitter ON. Check to make sure the black bar(s)
appear on the LCD screen indicating the mode you have selected (4B)
and reset the Barrier Transmitter to the desired range.
Mode A Mode B Mode AB
4B