Petsafe Aluminium Pet Door - Manual (Page 5)

FIG.8
Fit outer frame inserting bottom screw sleeves
fi rst. Tilt frame forward until fl ush with outer door
surface.
FIG.9
From the house interior fi t inner frame.
FIG.10
Measure your door thickness.
Cut screws to suitable length. Using
over long screws may damage front
frame. Do not over tighten.
Fitting and adjusting the fl exible fl ap
FIG.11
The fl exible fl ap is adjustable to fi t into frame
correctly.
FIG.12
Attach all nuts loosely.
FIG.13
Horizontal adjustment
Move fl ap left or right to adjust position.
Tighten nuts when correct.
FIG.14
Vertical adjustment
Move fl ap up or down to adjust position.
Tighten nuts when correct.
Your Staywell pet door is now
ready to use.
4