beautypg.com

Operating guide, Prepare the remote transmitter, Step – Petsafe 275 m Deluxe Remote Spray Trainer User Manual

Page 5: Charge the remote transmitter, Transmitter function and tones

background image

www.petsafe.net

5

Operating Guide

Prepare the Remote Transmitter

Charge the Remote Transmitter

1. Lift the rubber cover protecting the Remote

Transmitter Charging Jack.

2. Connect the charger connector to the Remote

Transmitter Charging Jack.

3. Plug the Universal Charging Adapter into a standard

household electrical socket, using the appropriate
Adapter plug.

4. Charge the Remote Transmitter for 24 hours for the

first charge. Recharges take only 12 hours.
Note: The Transmitter Indicator Light is solid after 12
hours of charging. For the first charge, continue to charge
the Remote Transmitter for an additional 12 hours.

5. When charging is completed, replace the

rubber cover.

Charger connector placed
in the Remote Transmitter
Charging Jack

Note: Approximate battery life between charges is 40 to 50 hours, depending on frequency of use.

Transmitter Indicator Light - Function and Response

Remote Transmitter Function

Indicator Light Response

Transmitter being charged for up to 12 hours

Flashes

Transmitter being charged for more than 12 hours

Solid in Colour

Any button being pressed - good battery

Solid in Colour

Any button being pressed - low battery

Flashes once per 1/2 second

Any button pressed for tone or spray correction Solid in Colour

Transmitter Function and Tones

Remote Transmitter Function

Tones

Side button

Good tone

Top button

Negative tone

Lower button

Spray Correction set by Intensity Dial

Step

1