Petsafe 2-in-1 Dog Kennel - Manual (Page 8)

8 1-888-632-4453
Cut the Fabric
1. Gather 5 clips and 1 tension rod.
2. Stretch the fabric as tightly as possible to the last post and select a fabric
wire to cut, allowing 4 ½" for the tension rod and clips (8A).
3. Cut the fabric by holding the fabric loosely while you spin one of the pickets out.
a. Undo the knuckle at the top and the knuckle at the bottom of the
same picket (8B).
b. Unweave that picket by spinning it out (8C). Be careful! Wire ends
are sharp.
c. Install the tension rod (8D) and 5 clips (8E).
4 1 /
2
"
Remove this picket
8A
8B 8C 8D
8E
________________________________________________________________________________________________
Secure the Fabric
Beginning at the gate opening, attach a tie wire to every 3rd diamond around the top
(9A) and every 5th diamond around the bottom (9B) of the kennel. Use any extra tie
wires around the bottom for extra security.
Note: Attaching tie wires around the bottom is easier if you temporarily raise the bottom of the kennel
onto bricks, blocks of wood, or the box that the kennel came in.
Important: Please, for your pets safety, train your pet to become accustomed to his
new home. Consult a professional for help.
9A
9B
Step
8
Step
9