PDR Mounts MDWM50 - Manual (Page 2)

Avoid installing in locations where the temperature and humidity are excessively high, and where contact with any
.
.
Do not install in locations where there is excessive vibration or impact. Injury and damage could result from the monitor mount
.
Use the specified screws in the specified places and tighten firmly. Failure to do this could cause injury if the monitor.
could result with injury due to the monitor mount falling. .
.
C A U T I O N : I N S T A L L A T I O N O F U N I T I S T O B E C A R R I E D O U T B Y Q U A L I F I E D T E C H N I C I A N S O N L Y. I N S T A L L I N
A N A P P R O P R I A T E L O C A T I O N B Y C H E C K I N G T H E S T R U C T U R E A N D D U R A B I L I T Y F O R S A F E T Y A N D
A C C I D E N T P R E V E N T I O N .
INSTALLATION LOCATION
water is possible. These can result in fire or electric shock.
.
.
falling. .
mount falls. .
Do not alter any of the parts. Do not use broken parts. This
.
Note:
.
2
CAUTION
WARNING
WARNING
Rev 120507
The wall where the mount is to be installed must be capable of long-term support of the
total load of the monitor and mount. Measures should be taken to ensure sufficient
strength to withstand the force of earthquakes , vibrations and other external forces.
Incorrect installation can cause the monitor mount to fall and cause injury.
Total load of the mount ( monitor + Mount)
Maximum weight - 20 Lbs ( 10Kg.)