PDR Mounts iwbb1614 - Manual (Page 4)

INSTALLATION INSTRUCTIONS FOR DRYWALL CUT-OUT
4
1: Find a suitable place for the IWBB-1614 box. Make certain that there is no plumbing, wiring or any other obstacle in the wall.
2: Locate the center of the wooden studs (using a stud finder) and mark the location of the studs.
3: The studs should have an inside dimension (between the two studs) of 14 1/4” to 14 3/4”
4: Mark the desired center line height .
5: Place the box on the center line between the studs and trace the back against the wall.
6: Cut-out with a drywall saw.
7: Route all necessary audio, video and electrical cables thru drywall cut-out.
CAUTION! A qualified electrician should make all power connections
7 3/4”
15 1/2”
14 1/4”
14 3/4” max
14 1/4” min
Stud location
View looking down from top of wall
Wood stud Drywall
VIEW CENTERLINE
FLOOR LEVEL
Adjust height to suite view center line
View of wall with cut-out in drywall
Drywall cut-out
Centered between studs