Night Optics TM-X Thermal Camera (160x120 | 25mm) - Manual (Page 7)

POWER MANAGEMENT
OPERATION
6 NIGHT OPTICS USA THERMAL IMAGING
Battery Charging
A battery charger, rechargeable batteries and all necessary cables have been provided as
part of your kit. Please read the following carefully to ensure proper use.
1. Install the batteries into the charger according the diagram on the charger.
2. Connect the appropriate wire for wall charging or car charging
3. An LCD screen will indicate proper installation by displaying an icon of the battery
charging.
4. Once the batteries are charged the unit will shut itself off to avoid damage to the unit or
to the batteries.
WARNING:
1. Do not attempt to recharge batteries while inside the Thermal device.
2. Do not attempt to recharge non-rechargeable batteries.
3. Properly dispose of bloated, deformed, corroded or leaking batteries.
4. Always use the correct cables with the charging unit.
Menu Mode
After start-up, press/hold the “M” button (fig. 2-1), the menu bar will appear with a
loading indicator on the screen. Press the “+” & “-” buttons (fig. 2-3 & 4) to navigate the
menu. Press the “M” (fig. 2-1) button momentarily to select the menu item.
Menu display loading Menu display - Lower 3rd of screen