Night Optics TM-X Thermal Camera (160x120 | 25mm) - Manual (Page 10)

Formatting the SD Card (Format)
In menu mode scroll to the menu option “Format” and press the “M” button. You will be
prompted with a dialogue box. Follow the on-screen instructions. You have the option to
exit this feature or confirm that you would like to continue formatting the SD Card. Once
the process is complete the dialogue box will confirm a successful reformat, at which
point you can you follow the on-screen instruction to exit.
Standby Menu
Standby mode operates using an IR based proximity sensor (fig. 1-10) located next to the
eyepiece (fig. 1-1). When not in use for the selected period of time the unit will automati-
cally shut itself down. Bringing the unit back up to your eye will reactivate. The longer the
unit remains in standby mode the longer it should take to power back on. In menu mode
scroll to the menu option “Standby” and press the “M” button. You can select 5 mode
options. 4 minutes; 10 minutes; 15 minutes; 20 minutes; Off (Default).
Default Menu (Device Reset)
In menu mode scroll to the menu option “Default” and press the “M” button. You will be
prompted with a dialogue box. Follow the on-screen instructions. You have the option to
exit this feature or confirm that you would like to continue to reset the unit to factory
settings.
9 NIGHT OPTICS USA THERMAL IMAGING
OPERATION
WARNING:
Using this feature will reset all device settings. Upon confirmation, the unit
and all settings will be restored to the original factory setting. Make notes
of specific settings that you like so that you can restore them later.