Cabletron Systems ESXMIM - Manual (Page 62)

Chapter 11: The Interface Statistics Screen
Page 11-4 ESXMIM/ESXMIM-F2 Local Management Guide
Interface
This command field allows you to select the interface(s) you want to
monitor.
11.2 SELECTING AN UPDATE-FREQ
The ESXMIM updates the Interface Statistics screen every three seconds
by default. The UPDATE-FREQ command allows you to adjust the
frequency in intervals of 3 seconds. The maximum update frequency is 99
seconds.
To adjust the UPDATE-FREQ, perform the following steps:
1. Use the arrow keys to highlight the UPDATE-FREQ command field.
2. Press [+/=] or [–] until the desired time/frequency appears (this
number increments/decrements in 3-second intervals with a minimum
of 3 seconds and a maximum of 99 seconds).
3. Press ENTER.
11.3 CLEARING STATISTICS COUNTERS
The ESXMIM provides a mechanism for resetting the statistics counter
displays for all interfaces to zero. To clear counters, perform the following
steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command
field.
2. Press ENTER. All counters will be reset to zero and be updated after
the current UPDATE-FREQ has passed.
NOTE
Local Management does not ask for verification before clearing
counters. Initiating this command will clear the counters
immediately.