Cabletron Systems ESXMIM - Manual (Page 36)

Chapter 4: The System Level Screen
Page 4-2 ESXMIM/ESXMIM-F2 Local Management Guide
The following definitions explain each System Level screen field.
System Date
Use this field to enter the system date.
System Time
Use this field to enter the system time.
Host IP Address
Use this field to enter the IP address of the ESXMIM.
Subnet Mask
Use this field to enter the subnet mask for the ESXMIM. Subnets are
logical divisions of the network that isolate groups of devices.
Default Gateway
Use this field to enter the default gateway for the ESXMIM. The default
gateway is the IP address of the network device (gateway or router) used
to forward SNMP traps to a management station. The default setting for
this field is NONE DEFINED.
Phys Address
This field displays the physical MAC address of the ESXMIM. You
cannot modify the physical address.
Default Interface
Use this field to select the default interface for the ESXMIM’s default
gateway. The default interface is the channel that is set up to handle
message traffic to the default gateway. The default setting for this field is
NONE DEFINED.
COM 1 Application
Use this field to select the communication port’s application. The
available setting for this field is LM.
NOTE
The subnet mask will default to a standard Class A, B, or C
subnet mask depending upon the IP address Class of the entry
in the Host IP Address field. This default subnet mask may be
modified if needed.