Cabletron Systems ESXMIM - Manual (Page 43)

ESXMIM/ESXMIM-F2 Local Management Guide Page 5-1
CHAPTER 5
THE SNMP COMMUNITY NAMES SCREEN
This chapter explains how to assign community names. Community
names allow you to control Local Management access by establishing
three passwords. Each password controls varying levels of access to
ESXMIM Local Management. Figure 5-1 shows the SNMP Community
Names screen.
Figure 5-1 The SNMP Community Names Screen
5.1 COMMUNITY NAME ACCESS POLICY
In order to perform any operations on the SNMP Community Names
screen, you must have used the super-user community name at the User
Password prompt when initiating the Local Management session. The
default community name for each access level is public or press ENTER.
SNMP COMMUNITY NAMES
Community Name
public
public
public
Access Policy
read-only
read-write
super-user
SAVE RETURN
09
Event Message Line
ESXMIM Local Management Flash Image Version: XX.XX.XX