Nexen EMB 130-24 964911 - Manual (Page 4)

4
FORM NO. L-21081-K-0813
GENERAL SPECIFICATIONS
Size
Min Holding
Torque
Torsional Rigidity
(Estimated)
Inertia
(Calculated) Weight
Min. Disengagement
Air Pressure
Size 2
2.25 Nm
[1.66 ft*lb]
6180 Nm/RAD
[4550 ft*lb/RAD]
0.00002 kg*m^2
[0.0005 lb*ft^2]
1.1 kg
[2.4 lbs]
5.5 bar
[80 psi]
Size 3
8 Nm
[5.90 ft*lb]
9613 Nm/RAD
[7090 ft*lb/RAD]
0.00005 kg*m^2
[0.0012 lb*ft^2]
1.5 kg
[3.2 lbs]
5.5 bar
[80 psi]
Size 4
22 Nm
[16.2 ft*lb]
23,796 Nm/RAD
[17,550 ft*lb/RAD]
0.00031 kg*m^2
[0.0074 lb*ft^2]
3 kg
[8.5 lbs]
5.5 bar
[80 psi]
Size 5
45 Nm
[33 ft*lb]
36,184 Nm/RAD
[26,690 ft*lb/RAD]
0.00114 kg*m^2
[0.0271 lb*ft^2]
6.3 kg
[13.8 lbs]
5.5 bar
[80 psi]
IEC 71
14 Nm
[10.3 ft*lb]
8120 Nm/RAD
[5990 ft*lb/RAD]
0.00031kg*m^2
[0.0074 lb*ft^2]
10 kg
[22 lbs]
3.3 bar
[48 psi]
IEC 80
45 Nm
[33 ft*lb]
13,450 Nm/RAD
[9,920 ft*lb/RAD]
0.0014 kg*m^2
[0.033 lb*ft^2]
15 kg
[33 lbs]
5.5 bar
[80 psi]
IEC 90
45 Nm
[33 ft*lb]
29,560 Nm/RAD
[21,800 ft*lb/RAD]
0.0014 kg*m^2
[0.033 lb*ft^2]
15 kg
[33 lbs]
5.5 bar
[80 psi]
EMB 625
45 Nm
[33 ft*lb]
5,430 Nm/RAD
[4000 ft*lb/RAD]
0.0014 kg*m^2
[0.033 lb*ft^2]
12.5 kg
[27 lbs] 3.3 bar
[48 psi]
EMB 875
45 Nm
[33 ft*lb]
20,470 Nm/RAD
[15,100 ft*lb/RAD]
0.0014 kg*m^2
[0.033 lb*ft^2]
12.5 kg
[27 lbs] 3.3 bar
[48 psi]
GENERAL SAFETY PRECAUTIONS
CAUTION WARNING
CAUTION
Some product assemblies can exceed
30 lbs. Use lifting aids and proper lifting
techniques when installing, removing, or
placing in service.
CAUTION
Watch for sharp features when
interacting with this product. The parts
have complex shapes and machined
edges.
This product is capable of emitting
a spark if misused, therefore it is not
recommended for use in any explosive
environment.
The output shaft needs to be enclosed
either by gear reducer or appropriate
guarding. Failure to guard could result
in serious bodily injury.
Pneumatic units accept an optional solenoid valve (normally closed) controlled by 24VDC at 104 mA. Solenoid valves are
fitted with 18" flying leads standard. To order the solenoid valve (optional), please refer to Nexen product #964650.
CAUTION
The output shaft needs to be enclosed
either by gear reducer or appropriate
guarding. Failure to guard could result
in serious bodily injury.
CAUTION
The temperature limits for the
product are 4.5-100 degree
Celsius (40-220 degree F).