Magnum Dynalab MD-807T User Manual
Page 24
- 24 -
24
DIGITAL INPUT /OUTPUT
CONNECTING TO AN EXTERNAL DAC
( digital to analog device)
Using a good quality digital cable connect from the digital outputs on the back of the MD unit
either ( RCA or optical ) to the DAC
CONNECTING TO ANOTHER DIGITAL
SOURCE;
Connect a digital cable from you digital source to the digital connector on the back of
the MD 807 T , move the switch on the back of the unit to digital. The digital signal
will now be sent through the DAC inside the MD 807 T , to go back to the analog
outputs move the switch back to the normal position ( DIGITAL OFF)
.