Magnum Dynalab MD-807T - Manual (Page 18)

- 18 -
18
IMAGE/FUNCTIONS OF RF-20 REMOTE
To use the remote control for your MD 807
you must first turn the unit ON with the
main power switch on the front of the unit.
Next put the remote into its proper mode to
communicate with the Internet
MediaTuner. Push the button next to MD
807. Your remote is now in the proper
operating mode.
1. ON BUTTON- Turns the touch screen on
2. OFF BUTTON-Turns the touch screen
off , when not using the unit turn off the
main power with the power switch on the
front off the unit.
3. GUIDE- allows access to all modes
4. INFO – Display’s additional information
about the station and song
5. DIRECTIONAL PAD – Use this to
navigate through the menu’s of your MD
807 T Tuner (up/down/forward/back)
6. STORING PRESETS.
FM /DAB
Tune to the station: for preset positions
from 1-5 push on the number you wish to
store the station at , the unit will tell you
that the station has been stored
For positions from 6-10 you must push
the large right arrow button under the
directional pad and the corresponding
number 1-5, 1 being position 6 and 5
being position 10. To recall the station
just push the number 1-5 or the large right
arrow button and the number 1-5
7. navigating in each mode:
Once you have chosen the mode the
directional pad and the select button
will give you access to all the functions.