Magnum Dynalab MD-809T - Manual (Page 4)

- 4 -
4
QUICKSTART:
BEFORE DOING THIS PLEASE START READING AT PAGE 4 FOR SETUP OF
UNIT
TURN ON UNIT WITH MAIN POWER SWITCH ON THE BACK AND FRONT OF
UNIT
Hooking up to the WIRELESS Internet service
1. Tap the Settings Menu
2. go to Network Settings
3. go to network wizard, go to wireless , a list of routers will be shown
4 go to the name of your service provider or name of the router
5 it will ask for your password or security code which if you have not set one up it will be the
key number or the number by the wireless symbol on your router. You must use your
password if you have set one up, if you can not find it , call your service provider.
6 the screen will then say connected
7 go back to the main screen ( push the X on the main screen) and choose what menu you
want to work with ie: internet radio, FM
Trouble Shooting:
1. If the wizard does not give you a list of routers go back to the Network Settings and tap on
the manual menu then tap on add wireless network , it will show DHCP yes and no , tap on
yes, enter the password for your router or the security code
See step 5 above, the screen will show connected
2. go back to the main screen (push the X on the main screen ) and choose the menu you want
to work with, ie: internet radio, Fm
LAN HOOKUP ( hard wire hookup )
1. Run a cable form the router to the back of the unit and under settings go to Network
Wizzard ,go to wired network, go to step 5 above