Magnum Dynalab MD-809T - Manual (Page 19)

- 19 -
19
IMAGE/FUNCTIONS OF RF-20 REMOTE
To use the remote control for your MD 809
you must first turn the unit ON with the
main power switch on the front of the unit.
Next put the remote into its proper mode to
communicate with the Internet Media
Tuner. Push the button next to MD 809.
Your remote is now in the proper
operating mode.
1. ON BUTTON- Turns the touch screen on
2. OFF BUTTON-Turns the touch screen
off , when not using the unit turn off the
main power with the power switch on the
front off the unit.
3. GUIDE- allows access to all modes
4. INFO – Display’s additional information
about the station and song
5. DIRECTIONAL PAD – Use this to
navigate through the menu’s of your MD
809 T Tuner (up/down/forward/back)
6. STORING PRESETS.
FM /DAB
Tune to the station: push the star with
the + sign on the main screen this will
store the stations in sequential positions,
to recall with the remote push the fav
button on the hand held and then scroll to
your favorite station by number and press
the select button.
7. navigating in each mode:
Once you have chosen the mode the
directional pad and the select button
will give you access to all the functions.
DOWN ARROW TAKES YOU TO
THE PREVIOUS SCREEN.