M2tech – M2TECH Vaughan User Manual

Page 8

Text mode
Original mode

VAUGHAN
384

/32bit digital-TO-ANALOG CONVERTER

REVISION 1PrA – MAY 2012

M2Tech

www.m2tech.biz

17) IEC mains input. Connect the power cord provided with the unit or any other power
cord provided with IEC 3-prong female connector.

18) Fuse holder. Contains two 2A thermal 5x20mm fuses. One is in service while the
other is for spare.

19) Power Switch. It’s a temporary (monostable) rocker switch. It automatically reverts to
the off position after the user release it. Operate it for a few seconds to switch the unit on.
(see Section 5 on Page 10).