M2TECH hiFace Two - Manual (Page 6)

hi F ace T wo
192 k H z /24bit digital audio interface
REVISION 1.0 – MAY 2013
Copyright © 2013, M2Tech Srl
6
M2Tech
www.m2tech.biz
2. Connection to the host
ADVICE: Windows users must install the driver prior to connecting the hiFace to the
PC (please refer to section 5).
Please refer to section 1, “Connections”.
Connect the hi
F ace T wo to the host USB 2.0 port by inserting its USB plug (Figure 1, 1)
into the host socket. If straight insertion is difficult or when in need of avoiding straight
insertion, an USB 2.0 extender cable (A male to A female) can be used. Please avoid
using extenders more than 4m, to avoid invalidating the bus performance.
If your computer has a Windows operating system and a driver hasn’t been installed prior
connecting the hi
F ace T wo, an error message may appear and you may need to
disconnect the hi
F ace T wo and install the driver (see section 5.3).