Home Styles 5558-83 - Manual (Page 2)

Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrenches and Hex Wrench in a safe place as you may need to tighten up the Nuts and Head Cap Bolts
in the future.
* Use a soft cloth between these part and the floor.
Figure 2
Insert all Bolts into the
pre-drilled holes of
Arm (B) and (C).
(See Figure 1)
STEP 1
Attach Arm (B) to Seat (A) with Flat Washers,
Spring Washers, Nuts and Nut Caps.
(See Figure 2)
STEP 2
Nut Cap
Nut
Flat Washer
Spring
Washer
B
C
B
A
Assembly Instructions 2/4