Chamberlain 1220E FS2 User Manual
Owner’s manual, Garage door opener

The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
Owner’s Manual
■
Please read this manual and the enclosed safety materials carefully!
■
Fasten the manual near the garage door after installation.
■
Periodic checks of the opener are required to ensure safe operation.
■
The model number label is located on the front panel of your opener.
®
GARAGE DOOR OPENER
For Residential Use Only
Model 1210E FS2
Model 1220E FS2
This manual is related to the following products:
Table of contents
Document Outline
- ENGLISH OWNER'S MANUAL
- TABLE OF CONTENTS
- INTRODUCTION
- ASSEMBLY
- ASSEMBLY STEP 1 - For sectional and one-piece doors only - Assemble the T-rail and attach the chain pulley bracket
- ASSEMBLY STEP 1 - For sliding gates only - Assemble the T-rail and attach the chain pulley bracket
- ASSEMBLY STEP 2 - For sectional and one-piece doors only - Install the trolley
- ASSEMBLY STEP 2 - For sliding and swing gates only - Install the trolley
- ASSEMBLY STEP 3 - Fasten the T-rail to the motor unit
- ASSEMBLY STEP 4 - For sectional and one-piece doors only - Install the chain and attach the sprocket cover
- ASSEMBLY STEP 4 - For sliding and swinging gates only - Install the chain and attach the sproket cover
- ASSEMBLY STEP 5 - Tighten the chain
- INSTALLATION
- INSTALLATION STEP 1 - Determine the header bracket location
- INSTALLATION STEP 2 - Install the header bracket
- INSTALLATION STEP 3 - Attach the T-rail to the header bracket
- INSTALLATION STEP 4 - Position the opener
- INSTALLATION STEP 5 - Hang the opener
- INSTALLATION STEP 6 - Install the door control
- INSTALLATION STEO 7 - Install the lights
- INSTALLATION STEP 8 - Attach the emergency release rope and handle
- INSTALLATION STEP 9 - Electrical requirements
- INSTALLATION STEP 10 - Fasten the door bracket
- INSTALLATION STEP 11 - Connect door arm to trolley
- ADJUSTMENT
- OPERATION
- PROGRAMMING
- MOTOR UNIT ASSEMBLY PARTS
- ACCESSORIES
- WARRANTY
- SPANISH