Citizen Systems CBM-910 User Manual
Page 45
— 42 —
In 3110 emulation
Following ESC + & + 01 (Note) + 41H + 42H
sending data 80H, 00H, 81H, 00H, 89H, 00H, 89H, 00H, FFH
00H, 89H, 00H, A9H, 40H, 81H, 00H, 80H, 00H
allows “
” to be registered at 41H and 42H.
[Printing registered character]
To print a registered character, executing Activate Registered Character
command (ESC + “%” + 1) may be required in some case. If you want to
return to the internal characters, it is necessary to disable the registered
characters. Refer to the description for Valid/Invalid of Registered Characters
command.
Note: With 0 being set in “C1” parameter even if data have been registered
in the uppermost position, letter image registered is made incomplete.
3
2
1
6
5
4
9
8
7
3
2
1
6
5
41H
42H
4
9
8
7
As this printer takes half-dot printing system, dots cannot be aligned
continuously in printing (horizontal) direction. Therefore, even if any pattern
is specified at point “*” at the right of point “
●” above, it cannot be registered
as a pattern.
Configuring a double width character by registering the data for 2 characters
is also possible.
” by using two
characters 41H and 42H
3
2
1
6
5
4
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
7
41H
22H
55H
08H
41H
00H
41H
*
*
*
*
*
*