4 setting paper – Citizen Systems CBM-910 User Manual

Page 19

Text mode
Original mode

— 16 —

NO GOOD

Paper holder

4.4 Setting Paper

(1)

Remove the printer cover.

(2)

Ensure that the end of the paper is straight or incline as indicated in the diagram.

(3)

With the paper holder thrown in the arrow direction, load paper so that the top of
paper go 5 to 6 cm beyond the printer mechanism and attach the printer cover
while passing the paper through the eject slot of the printer cover.

Note:

Paper, if held aslant at the paper feed or the paper discharge side, may cause
paper jamming. On occurrence of the above, immediately turn off the power
and slowly pull out the jammed paper upright.