Hit Products Pro-Two - Manual (Page 26)

WWW.RAINPROCO.COM
24 PRO 2
Statement regarding Wire Sizing for the PRO2 –C
FAQ’s
The Pro2 Controller and two wire output is designed for use with standard single strand
solid core copper wire to accommodate a two wire path run not to exceed a 2,000’
direct wire path from the Controller to the valve. Total wire in system may exceed the
single station maximum distance of 2,000’.
Q:It has been asked what about increasing wire size to get longer wire runs.
A: The answer to the question is that the Controller’s two wire communication transmit-
ting capability will not reliably operate beyond a distance of 2,000’ regardless of wire
size.
NOTE:
Controller specifications are based on a Standard 24VAC irrigation valve solenoid rated
with a maximum 350 mA inrush and a maximum 250 mA holding current at 24VAC.
Controller is not compatible with Low Power / Diode Bridge solenoid