beautypg.com

Capacity plate, Know the hazards, 13 capacity plate – Crown Equipment SR 5200 User Manual

Page 8: Capacity plate 14

background image

Capacity Plate

13 Capacity Plate

CAPACITY PLATE INFORMATION
The capacity plate is on the corner support,

close to the steering wheel. It contains:
• Serial number
• Capacity information (load, load center and lift height)
• Truck type (a fire safety rating)
• Truck weight with max. battery (does not include load)
• Attachment information (if any)

• Mast collapsed height

READING YOUR CAPACITY PLATE
Capacity may be reduced as lift height increases.

For example: On the sample plate, 1210kg (2670 lb) can

be lifted to 9155mm (360 in). But above 9155 (360), to

11435 (450), capacity is reduced from 1210 (2670) to

600 (1325).

Capacity is reduced as load center increases. If you

must handle loads with longer load centers, an additional

capacity plate will show the reduced capacities.

SAMPLE
CAPACITY PLATE

The information
shown on this
sample plate
does not apply to
your truck.

A

B

CAUTION
You may not increase capacity

if load center is less than

shown on your capacity plate.

Note:

ANSI B56.1 requires

that all data be shown first in

Metric units and then USA

units.

OTHER LIFT HEIGHTS & LOAD CENTERS
Contact Crown for capacities at lift heights or load

centers not given on your capacity plate.

Capacity Plate 14

Know the Hazards

TRUCK WEIGHT
Dockboards, elevators and some floors have limited

capacity. Check your capacity plate for the weight of

your truck. Make certain to use the correct units of

measure. Remember to add the weight of the load you

have on the forks.

TRUCK TYPE
Some truck types are not permitted in areas where there

are fire hazards. Watch for marked areas.

For example:

You must not drive a type E or ES truck into an area

restricted to EE or EX trucks.

ATTACHMENT DATA
If an attachment on your truck does not match the

information given here on your capacity plate, don't

operate your truck. Your capacity plate may be wrong.

Report the problem to your supervisor.

MAST COLLAPSED HEIGHT
Some work areas may have overhead obstructions. Mast

Collapsed Height is the minimum height your truck can

clear, providing the backrest and load are lowered below

the top of the mast.

502-B

SR

Serial Number

Attachment Data

Truck Weight with Max. Battery

Capacity with Mast Vertical

Load

Center

Units of measure,

kg/mm(lb/in)

Capacity

Truck Type

Mast Collapsed Height

5200

S E R I E S

3680 (8110)

4252 (167.4)

E

1234567890

1250(2750) 10832(427) 600(24)
1250(2750)

9152 (360) 600(24)

2000(4500)

7205 (283) 600(24)

Sideshifter-100mm (4 in)