Crown Equipment SR 5200 - Manual (Page 5)

Your Rider-Reach Truck
RIDER-REACH TRUCKS
Your rider-reach truck is designed to lift, move and stack
loads.
YOUR LIFT TRUCK IS NOT AN AUTOMOBILE
With a load it may weigh more than 3 automobiles.
• You don't steer the same.
• You don't sit the same.
7 Your Rider-Reach Truck
GIVE YOUR BODY A BREAK
Take advantage of stop time. Flex your arms and legs.
Staying alert will help you be a better and safer driver.
FORK FUNCTIONS, STANDARD AND OPTIONAL
Raising and Lowering the forks, Tilt (fork tips up or down),
Reach (extend or retract the mast), Sideshift (right or
left), and Rack Height Select are standard on the SR
model. Your company may select other options as needed
in your work area, and should train you how to use them.
HOW TO DRIVE YOUR TRUCK
Your truck is equipped with a multi-adjustable seat.
You drive your truck by sitting sideways and leaning back
into the seat. This, along with your hands on the controls
and feet on the pedals or floorboard, gives you stability.
The controls are located so you can vary your body
position for best comfort and visibility.
Sit
sideways
Hands on
controls
Lean back
into seat
Feet on
pedals or
floorboard
Your Rider-Reach Truck 8
BUILT TO STANDARDS
This truck was designed and
built to current industry and
government standards and
guidelines. For more
information see the following:
• American National
Standards Institute
(ASME) B56.1
• Occupational Safety and
Health Act (OSHA)
§1910.178, Rev. 1999
• Underwriters Laboratory
(UL) 583
• National Fire Prevention
Association (NFPA) 505