Drawing view361, Drawing view362, Drawing view363 – AVF T324 T3 User Manual
Page 3: Drawing view364, Drawing view385, Drawing view387, Drawing view439, Drawing view461, Drawing view466, Drawing view467
(Fan is optional)
Short bolt
(x6)
1" Wood
screws
(x16)
Mending plate
(x2)
Short Bolt
(16)
7/16 Wrench
or Socket set
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Page 3
of 5
Step 4
Adding legs to the rack.
Using wrench or socket 7/16 , Bolt
all 4 legs to the bottom of the rack using
included Short bolts.
Leg height adjustment: Adjust the legs to
the lowest position.
Step 5
Adding rackrails to the rack.
1)Using A wrench or socket and included hex bolts.Screw
both rackrails into the metal inserts already in the sides.
2)Carefully roll the rack over onto its legs. (not shown)
Do not lift by the wings
Step 6
Positioning and attaching
bridge.
Position rack space where required
holding bridge in place as a spacer.
Bridge may be attached to a wall
(shown),furniture or a TP800 stand.
Wall