Drawing view355, Drawing view358, Drawing view448 – AVF T324 T3 User Manual
Page 2: Drawing view458, Drawing view459, Drawing view460, Page 2, Step 2, Step 3, Step 1
Long Bolt
(4 per leg)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Page 2
of 5
VC-Table Assembly
Step 2
Inserting fasteners
1) On a non abrasive surface such as carpet
Carefully Flip table pieces so black laminate
side faces up. (not shown)
2) Using a Philips (+) screwdriver insert the
cam screws into available holes on parts shown.
3) Insert quarter turn cams into parts shown
with arrow pointing to nearest edge.
Step 3
Assembling rack
1)Apply the sides to the base piece.
Do not tighten the fasteners yet.
2) Insert the side pieces onto the rack table top.
Tighten all with a philips(+) screwdriver.
Step 1
Attaching Legs
1) Using a ratchet and a 7/16 socket tighten
both legs as shown.