B&C Technologies DI-225 Industrial User Manual
Page 14
Outside Duct Work Protection
To protect the outside end of horizontal duct work from the weather, a 90
o
elbow
bent downward should be installed where the exhaust exits the building. If the duct
work travels vertically up through the roof, it should be protected from the weather
by using a 180
o
turn to point the opening downward. In either case, allow at least
twice the diameter of the duct between the duct opening and the nearest
obstruction.
IMPORTANT: Do not use screens or caps on the outside of opening
of exhaust duct work.