Allen&Heath Qu-32 - Manual (Page 64)

Qu Mixer User Guide 64 AP9372 iss.5
10. iOS Apps for Wireless Control
Two Qu apps are available from the Apple Store: Qu-Pad - Engineer’s live mixing control
Qu-You - Musician’s personal monitor control
Qu-Pad
is an engineer's mixing tool giving you the freedom to
walk the room or stage and control the sound right where it is
needed. Qu-Pad gives you control of the live mix. It is not for
system setup or memory management which can be accessed at
the mixer. Qu-Pad and the Qu console can work together to
provide simultaneous control of independent functions, for
example one engineer using the console to mix front-of-house
sound, and another using the iPad to mix monitors on stage.
Qu-Pad runs on all models of iPad running iOS5.1.1 or higher.
Current version tested at the time of this release is iOS8.
Note – Current firmware supports only one iPad running Qu-Pad. However, you can connect up to 7
additional iPhones, iPads or iPod Touch devices running the Qu-You monitor app.
Live mixing functions available:

Fader levels, mutes, pan

Aux and FX sends, routing and Pre/Post switching

Group masters and routing (not Qu-16)

Matrix masters (not Qu-16)

Input Preamp/USB selection

Preamp Gain, Pad, Polarity and 48V
 HPF, Gate, PEQ, GEQ, Comp, Delays

FX Tap Tempo

Mute Groups

DCA Groups

RTA function

PAFL select

Full signal metering

Custom strips for personalised channel layout
 Channel naming (stored in the Qu mixer)
Setup functions not available:

FX patching and parameter setup

Local/dSNAKE Preamp source selection

Global Qu-Drive/USB B source selection
 Insert switching and channel linking

Output patching

Aux source routing options

Matrix sends and routing

Scenes and Libraries

Show memory store and load

Scene Recall Filters and Safes edit
 Copy/Paste/Reset of parameters

SoftKeys

Signal Generator

Talkback

System configuration, options and preferences
CH PEQ shown
Custom Layer setup
LR mix selected, CH preamp shown