beautypg.com

Allen&Heath ME-1 User Manual

Page 24

background image

User Guide – AP8997 iss.3

24

ALLEN

&

HEATH

8.2 Setup mode

Hold Shift and press the Group key to enter
the Setup Menu:

Use the Rotary to scroll through the list and
press to select a menu item.

Press the Master key to return to the previous
screen.
Press the Group key to return to Normal
mode
.

8.3 Adjusting the brightness

Scroll to the Dimmer menu:

There are two settings. Press the Rotary to
toggle bright or dim. The dimmer affects the

screen and key brightness.

8.4 The About screen

Select the

About

screen:

This screen displays information about the

ME-1 mixer:

Current Configuration name (the settings)

Current Unit name (the mixer)

Current operating Firmware version

MAC address (factory programmed)

8.5 Assigning Key Sources

The audio source for each of the 16 Select
keys can be freely assigned to suit your
application.

Select the Key Setup

Source

screen:

A list of available sources is displayed. Use

the Rotary to scroll through and press to
select the required source:

Unassigned – The key does not select any
audio source. Choose when you want to
leave keys unused or used for presets only.
Group – Sets the key to be a group with a
master affecting the overall level of all
channels assigned as its members. For
example a ‘Drums’ or ‘Vocals’ group.
Aux Input – Selects the local stereo line input
available on the rear of the mixer.
Auto Mode – The key automatically assigns
the first available channel not already

assigned.
1kHz Sine – A sine wave tone for testing and
setting levels of equipment connected to the
ME-1 outputs.
Channels 1-40 – Assign an individual source
to the key from one of up to 40 channels
received via the Cat5 cable.

Note

Stereo channel pairs assign to single

keys if stereo link data is received from the
connected source (GLD, ME-U, Aviom

®

).

Note

The source list will display channel

names if these are received from the
connected source (GLD, ME-U).

Dimmer

About

System Setup

Press Group to exit

Key Setup

Dimmer

About

Key Setup

Press Group to exit

System Setup

Config:

MATT

Unit:

MM4

Firmware:

V1.00r9057

Mac:

00:04:C4:00:73:3A

Source:

Unassigned

Name:

Members:

Preset:

StoreRecall

Unassigned

Group

Aux Input

Auto Mode

1kHz Sine

Source: