Clarion CD/USB/MP3/WMA/AAC Receiver with CeNET Control CZ309 - Manual (Page 17)

Operations Common to Each Mode
English
17
CZ309
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
3-1. Press the [
w] or [z] button to select “ON”
or “OFF”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
∗ When you want to see the title again, in the
title mode, press and hold the [DISP] button
for 3 seconds or longer to scroll the title.
● Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Press the [
w] or [z] button to select “ON”
or “OFF”.
● Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “A-CANCEL”.
3-1. Press the [
w] or [z] button to select “ON”
or “OFF”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular
phone interrupt to “ON”.
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
2-1. Select “TEL-SP”.
3-1. Press the [
w] or [z] button to select
“RIGHT” or “LEFT”.
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
3-1. Press the [
w] or [z] button to select the
setting. Each time you press the [
w] or
[
z] button, the setting changes in the
following order:
“OFF” ↔ “ON” ↔ “MUTE”
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “S-CHECK”.
3-1. Press and hold the [ ] button for 1
second or longer.
“S-CHECK” appears in the display, then
the unit returns to the previous operation
mode.
DXZ385USB_ENG.book Page 17 Friday, October 17, 2008 1:52 PM