Clarion RX755VD - Manual (Page 25)

VRX755VD
27
English
Owner
’s
manual
Basic Operations
Adjusting the MONITOR
Adjusting the brightness and tone
of color
Notes:
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [ ADJ ] button to switch to the
ADJUST mode menu.
2. Touch the [ MONITOR ] key.
3. Touch the [ MONI ADJ ] key to display
[ BRIGHT ], [ HUE ] and [ COLOR ] key. Touch
the [ BRIGHT ], [ HUE ] and [ COLOR ] key to
adjust BRIGHT, HUE and COLOR.
●
“BRIGHT”:
Adjust the brightness of the display.
●
“HUE”:
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available only when the car
is stopped and the parking brake is applied.
● “COLOR”:
Adjust the color saturation.
• This operation is available only when the car
is stopped and the parking brake is applied.
4. Operate the touch key to adjust a level.
● “BRIGHT”:
[ Î] Press to make image brighter
[ Å] Press to make image dimmer
● “HUE”:
[ Î] Press to increase green
[ Å] Press to increase red
● “COLOR”:
[ Î] Press to increase color depth
[ Å] Press to decrease color depth
5. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
Adjusting the dimmer level
Use to adjust panel brightness when car lights
are ON/OFF.
●
The factory default:
When the car light is off: Brightest setting (58
steps)
When the car light is on: Medium brightness (29
steps)
1. When the panel is open, press the [ ADJ ]
button to display the ADJUST mode menu.
2. Touch the [ MONITOR ] key, and touch the
[ DIMMER LEVEL ] key to adjust the dimmer
level.
3. Touch the [ О О О О О] or [Е Е Е Е Е] key to adjust.
4. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
Warning display when CCD camera
is installed
When a TV tuner (sold separately) is installed
together with optional CCD camera, the
following warning message is displayed during
use of the CCD camera: “
Make sure of safety
around your vehicle ”
∗ The factory default setting is “ ON”
1. Press the [ ADJ ] button.
2. Touch the [ MONITOR ] key, and touch the
[ CCD WARNING ] key to switch between
“ ON ” and “ OFF ”.
3. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
∗ The factory default setting is “ NTSC ”.
Switch to the VISUAL/VTR in TV mode you use.
1. Press the [ ADJ ] button to switch to the
ADJUST mode menu.
2. Touch the [ MONITOR ] key.
3. Touch the [ NTSC/PAL ] key to select “ NTSC ”
or “ PAL ”.
4. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
Front monitor lock
1. Press and hold the [ ADJ ] button for 1 second
or longer.
2. Press the [ SOURCE ] button to select the
desired mode.
3. To cancel the monitor lock, press the [ ADJ ]
button.
The screen shows the image of the selected
mode.