O getting started, Step 1. connect the corded base, Tips – Motorola L402C User Manual
Page 3: Important, Step 3. set the display language
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O Getting started
step 1. Connect the corded base
♦ Connect the corded handset to the corded base with the provided
coiled cord.
♦ Plug the power adapter with smaller pin plug & telephone line cord
into the corded base.
♦ Plug the other end of the power adapter & telephone line cord into
the wall jack.
TIPS
Do not place your phone in the bathroom or other humid areas. Please
refer to the user's guide for more cautions when you choose the location
of your phone.
IMPORTANT
Only use the power adapter and telephone line cord supplied with the
product.
step 2. Install and charge the cordless
handset battery pack
♦ Slide out the battery compartment cover. Place the supplied
rechargeable battery pack in the battery compartment, with the
battery connector plugged in, as shown.
♦ Slide the battery compartment cover back.
♦ Put the cordless handset on the charger to charge for at least 24
hours. When the cordless handset is fully charged the will
indicate that it is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided.
step 3. Set the display language
For the corded base:
♦ Press ^ ^ J and ^
♦ Press ^ ^ J and ^
/
to select Settings.
) to select Language.