Zippy ARD-6400F - Manual (Page 31)

1.4. FEATURES
REDUNDANCY Independent DC Outputs and passive backplane design
ensure redundant function been performed for computer
system. Balance Share loading with no transfer time when
backup takes place.
HOT-SWAP
FUNCTION
The power system provides a HOT-SWAP function. This
means when one of the redundant power module fails or
breaks down, you can easily replace failed unit without any
interference to the system.
BUZZER A warning buzzer sounds when any one of the power module
fails. The warning buzzer is resettable from either the front
control panel or switch on the rear side.
POWER DEFECTIVE
SIGNAL
The unit provides a power defective signal through the proper
card to acknowledge the system
LEDS
The warning LEDs can be found either on the rear side or the
control panel of the power system. Tells if one of the two
power modules failed, by LED changing color.
HOT-PLUGGABLE
FUNCTION
The power system provides tool-free Hot-Pluggable function.
This allows the power units in the Disk Array/File Server to be
removed or inserted very easily without opening and closing
the chassis.
SAFETY
Since the power system used isolated fence and power
supply Last Contact / First Release (LCFR) prevents a
person from being shocked by high AC voltage during the
installation or HOT-Swap procedure. UL, UL+C, TUV, CB
approved.
RELIABILITY
The power unit’s ON / OFF is controlled by the use of a very
small DC current, this prevents damage the power system.
Besides, it uses heavy-duty connector, align guide increase
the
reliability.
COMPATIBILITY The enclosure of the power system is well designed, so
under proper arrangement / assembly, the redundant power
supply can built to various form factors such as RPD / RPI.
Besides, its input power sources can be located on
alternative position to meet various applications, such as
power system located on the front side of the rackmount
chassis, and power source from the rear side.
REMOTE SENSE The power system is designed with remote sensing feature:
this makes the regulation of voltages more excellent.
I
2
C INTERFACE
(OPTIONAL)
The unit provides communication ability through I 2 C,
system
administrator can monitor/ manage the power system